2nd shift Millwright / Maintenance MechanicMetal Flow Corporation • Holland, Michigan, United States
Dieses Stellenangebot ist nicht mehr verfügbar
2nd shift Millwright / Maintenance Mechanic
Metal Flow Corporation
- Holland, Michigan, United States
- Holland, Michigan, United States
Über
*DETAILED JOB RESPONSIBILITIES*
1. Troubleshooting Mechanical Issues & Repair
* Diagnose causes of mechanical malfunctions or equipment failures and perform necessary repairs.
* Incorporate preventative maintenance to reduce recurrence of issues.
* Plan, direct, and record periodic testing of equipment; recommend or initiate modifications or replacements when standards are not met.
* Identify root causes of equipment failures and implement corrective actions.
* Work with pneumatic and hydraulic systems.
* Demonstrate leadership while being receptive to direction and collaboration.
2. Planning & Implementing New/Upgraded Installations
* Collaborate with engineering on setting up new mechanical equipment and designs, assisting with implementation.
* Support engineering with building, fabricating, and assembly tasks.
* Replace, repair, or adjust defective or worn mechanical components.
* Perform rigging and equipment installation.
* Conduct pipe fitting as required.
3. General Maintenance
* Perform skilled duties in installing and maintaining a variety of equipment and machinery.
* Follow lockout/tagout procedures when servicing, repairing, or installing equipment.
* Conduct general building and grounds maintenance.
* Operate forklifts and aerial platforms as needed.
* Work effectively in all stamping environments.
* Assist fellow maintenance technicians with installation, troubleshooting, and repair of equipment and building systems.
4. General Responsibilities & Special Projects
* Complete additional tasks, projects, and responsibilities as assigned by supervisor.
* Contribute to meeting company Business Plan goals and objectives.
* Demonstrate teamwork and collaboration with other departments.
* Take ownership by completing repairs in a timely manner and following up with customers to ensure effectiveness.
* Participate in continuous improvement initiatives and support implementation.
* Maintain a clean, safe, and organized work area in compliance with 5S standards.
* Uphold workplace safety and ensure quality standards are met.
*JOB REQUIREMENTS*
Education, Knowledge, Skills & Experience
* High school diploma or GED preferred.
* Experience with mills and lathes helpful.
* Welding and fabrication skills required.
* Minimum of 4 years’ experience in a metal stamping or related environment.
* State of Michigan Journeyman Millwright certification (or equivalent).
Physical Requirements
* Moderate level of physical activity, including standing, walking, bending, pushing, and pulling for extended periods.
* Ability to read and use precision measuring tools.
* Regularly lift, push, pull, and move up to 55 lbs; occasionally up to 75 lbs.
* Must wear appropriate PPE, including OSHA-approved footwear, safety glasses, and hearing protection in designated areas.
* Additional PPE may be required depending on the work task.
_Metal Flow is an Equal Opportunity Employer. _Metal Flow Corporation is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, marital status, veteran status, genetic information, or any other protected characteristic under applicable law. In addition to federal law requirements, Metal Flow Corporation complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Metal Flow Corporation expressly prohibits any form of workplace harassment based on race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, marital status, veteran status, genetic information, or any other protected characteristic under applicable law. The company also prohibits retaliation against any employee who makes a complaint or participates in an investigation regarding possible EEO violations. _If you require a reasonable accommodation to assist with any part of the application and/or hiring process, please contact us at hr@metalflow.com._
_Metal Flow _participates in the E-Verify program, a service of the U.S. Department of Homeland Security and the Social Security Administration. As part of our commitment to a lawful workplace, we use E-Verify to confirm the employment eligibility of all new hires. Applicants must provide documentation that establishes their identity and eligibility to work in the United States. The E-Verify system will be used to verify this information. For more information about E-Verify, please visit the E-Verify website.
Job Type: Full-time
Benefits:
* 401(k)
* 401(k) matching
* Dental insurance
* Employee assistance program
* Flexible spending account
* Health insurance
* Health savings account
* Life insurance
* Paid time off
* Retirement plan
* Tuition reimbursement
* Vision insurance
Ability to Commute:
* Holland, MI 49424 (Required)
Ability to Relocate:
* Holland, MI 49424: Relocate before starting work (Required)
Willingness to travel:
* 25% (Preferred)
Work Location: In person
Sprachkenntnisse
- English
Hinweis für Nutzer
Dieses Stellenangebot wurde von einem unserer Partner veröffentlicht. Sie können das Originalangebot einsehen hier.