3rd Shift - Molding Operator AssistantStaffing Support Specialists • Menomonee Falls, Wisconsin, United States
3rd Shift - Molding Operator Assistant
Staffing Support Specialists
- Menomonee Falls, Wisconsin, United States
- Menomonee Falls, Wisconsin, United States
À propos
Description
Molding Operator Assistant
1.
JOB SUMMARY
Under the
direction
of the
Molding Set-Up
Operator
, operate and maintain
compression
injection
molding machine
s
and several deburring operation machines such as a
wheelabrator
,
degater
, and tumbler. Ope
rate and maintain molding presses proper temperatures,
cycle time, and vacuum units. Assist with removal and installation of
molds from presses and load parts into the appropriate deburring machine operation. Check molded parts for dimension, finish, and remove flash.
2
.
DUTIES
AND
RESPONSIBILITIES
Assist the Molding Set-Up Technician on the
molding presses to perform standardized
work by
running presses and
maintaining
proper temperatures and set cycle time
s
for molding. Setups
are made and maintained by technicians, but operator
assistants will be expected to learn how to start up presses and learn the more advanced duties
over
time
. Must be capable of recognizing defective materials, parts, and machine malfunctions. Keep molds clean and vents open
;
fiber brush molds on an hourly basis. Load and o
perate
wheelabrator
/tumbler to remove flash/
scale
from parts for specified finish.
Carefully perform
uniform cleaning
that is necessary for molders to operate properly,
avoid
ing
damage to or breakage of parts. Assist lapping operation by processing parts for lapping process & vision system inspection. If part
s require
degating
, load parts i
n the
degater
hopper and adjust abrasive and cycling time to suit cleaning requirements. Generally close tolerance work where dimensional and surface finish requirements are not difficult to maintain due to machine setups of cycling time and feed of abrasive. Will operate and maintain all machinery according to training instructions and will also be responsible for the inspection of product. 3.
MINIMUM LEVEL OF EDUCATION/TRAINING REQUIRED
:
GED preferred 4.
MINIMUM EXPERIENCE REQUIRED TO PROFICIENTLY PERFORM THE
JOB
DUTIES:
Requires a fundamental knowledge of machine shop operations as acquired by short job training and experience. 2+
years
machine operation experience 6
.
PHYSICAL
DEMANDS
Amount of Time
None
Up to 1/3 of the time
1/3 to 2/3 of the time
2/3 or more
Stand
x
Walk
x
Sit
x
Use hands to finger, handle or touch
x
Reach above shoulders
x
Climb or balance
x
Stoop, kneel, crouch or crawl
x
Talk or hear
x
Taste or smell
x
Use foot/feet to operate machine
x
Amount of Time
None
Up to 1/3 of the time
1/3 to 2/3 of the time
2/3 or more
Up to 10 pounds
x
Up to 25 pounds
x
Up to 50 pounds
x
Up to 100 pounds
x
More than 100 pounds
x
7
.
TOOLS/EQUIPMENT USED:
Compétences linguistiques
- English
Avis aux utilisateurs
Cette offre provient d’une plateforme partenaire de TieTalent. Cliquez sur « Postuler maintenant » pour soumettre votre candidature directement sur leur site.