SIGNUP

Job Opportunities

Find jobs near you, whether onsite, hybrid, or remote.
  • Similar Jobs to: Data Center Electrical Design Engineer
XX
Electrical Design EngineerSpectra Tech, Inc. • Greenville, North Carolina, United States
Apply Now
XX

Electrical Design Engineer

Spectra Tech, Inc.
  • US
    Greenville, North Carolina, United States
  • US
    Greenville, North Carolina, United States
Apply Now

About

Electrical Principal Design Engineer Job Description Provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific project area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer, serve as a Supervising Lead providing guidance / supervision to other engineers and designers Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements Develop and review specifications and design criteria Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of advanced complexity Coordinate technical issues with other disciplines, project management, vendors, and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost, and schedule baselines Develop and review estimates, schedules, and progress reports including effort- hour estimating and staff forecasting Establish, control, and report on material key quantities; provide analysis and forecasts Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Bachelor of Science degree in Electrical (Power) Engineering and minimum fifteen (15) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs Significant experience providing Engineering, Procurement, and Construction (EPC) services on large industrial projects Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D Computer-Aided Drafting and Design (CADD) automation tools in a multi-discipline environment Discipline Specific Job Requirements Interpret and apply national, state, and local codes and standards, and customer design requirements for the preparation of electrical design / construction documents, specifications, and system descriptions related to assigned tasks through project startup Prepare and modify electrical design drawings (e.g., single line diagrams, schematics, wiring diagram layouts, raceway, lighting, and grounding) Perform complex system studies (e.g., short circuit, load flow, stability, motor starting, harmonics, relay coordination and ground grid) Develop complex area classifications and design documents Develop complex electrical design documents Perform electrical calculations such as short circuit, relay coordination, voltage drop, cable de-rating, and cable pulling tension Prepare motor schematics and wiring diagrams Preferred Qualifications Professional Engineer license Experience with design of systems, structures, and components for nuclear facilities under the requirements of American Society of Mechanical Engineers (ASME) NQA-1 Advanced knowledge of commercial availability and cost of materials Demonstrated experience managing and leading large projects Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Advanced knowledge of: Electrical codes and standards Electrical power systems Electrical power systems software (e.g., SmartPlant Electrical (SPEL), Electrical Transient and Analysis Program (ETAP) Electrical Senior Design Engineer Job Description Provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer, serve as an Area Lead providing guidance / supervision to other engineers and designers Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements Develop and review specifications and design criteria Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of advanced complexity Coordinate technical issues with other disciplines, project management, vendors, and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost, and schedule baselines Develop and review estimates, schedules, and progress reports including effort- hour estimating and staff forecasting Establish, control, and report on material key quantities; provide analysis and forecasts Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Bachelor of Science degree in Electrical (Power) Engineering and minimum ten (10) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Significant experience providing Engineering, Procurement, and Construction (EPC) services on large industrial projects Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D Computer-Aided Drafting and Design (CADD) automation tools in a multi-discipline environment Discipline Specific Job Requirements Interpret and apply national, state, and local codes and standards, and customer design requirements for the preparation of electrical design / construction documents, specifications, and system descriptions related to assigned tasks through project startup Prepare and modify electrical design drawings (e.g., single line diagrams, schematics, wiring diagram layouts, raceway, lighting, and grounding) Perform complex system studies (e.g., short circuit, load flow, stability, motor starting, harmonics, relay coordination, and ground grid) Develop area classifications and design documents Develop electrical design documents Perform electrical calculations such as short circuit, relay coordination, voltage drop, cable de-rating and cable pulling tension Prepare motor schematics and wiring diagrams Preferred Qualifications Professional Engineer license Experience with design of systems, structures and components for nuclear facilities under the requirements of American Society of Mechanical Engineers (ASME) NQA-1 Advanced knowledge of commercial availability and cost of materials Demonstrated experience managing and leading large projects Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Proficiency with Intergraph Smart3D (S3D) Proficiency with Visual Professional lighting design software Advanced knowledge of: Electrical codes and standards Electrical power systems Electrical power systems software (e.g., SmartPlant Electrical (SPEL), Electrical Transient and Analysis Program (ETAP), etc.)
Electrical Design Engineer Job Description Provide essential technical knowledge and perform engineering work as described below. This position serves as a staff engineer performing engineering assignment of intermediate complexity. Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements Develop and review specifications and design criteria Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost, and schedule baselines Establish, control, and report on material key quantities; provide analysis and forecasts Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Bachelor of Science degree in Electrical (Power) Engineering and minimum five (5) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Intermediate knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs Experience providing Engineering, Procurement, and Construction (EPC) services on commercial or industrial projects Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D Computer-Aided Drafting and Design (CADD) automation tools in a multi- discipline environment Discipline Specific Job Requirements Create and modify electrical design drawings (e.g., single line diagrams, schematics, wiring diagram layouts, raceway, lighting, and grounding) Perform complex system studies (e.g., short circuit, load flow, stability, motor starting, harmonics, relay coordination and ground grid) Develop area classifications and design documents Develop electrical design documents Perform electrical calculations such as short circuit, relay coordination, voltage drop, cable de-rating, and cable pulling tension Prepare motor schematics and wiring diagrams Preferred Qualifications Professional Engineer license Experience with design of systems, structures and components for nuclear facilities under the requirements of American Society of Mechanical Engineers (ASME) NQA-1 Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Proficiency with Intergraph Smart3D (S3D) Proficiency with Visual Professional lighting design software Advanced knowledge of electrical power systems software (e.g., SmartPlant Electrical (SPEL), Electrical Transient and Analysis Program (ETAP), etc.) Intermediate knowledge of power systems
  • Greenville, North Carolina, United States

Languages

  • English
Notice for Users

This job comes from a TieTalent partner platform. Click "Apply Now" to submit your application directly on their site.

9'879 Job Opportunities: Find Jobs Near You, Onsite, Hybrid, or Remote